The MailSwing
itself is an arm that is mounted on either a 4" X 4" wood post or 2 1/2" steel pipe. Its HEAVY DUTY all steel construction keeps your mailbox out of harm's way like this:
First, the base of your post can be mounted farther away from the road's edge than a conventional mailbox post. The arm itself is
adjustable so you can position your mailbox at a distance that's right for you.
When a plow blade throws its heavy load of snow against your mailbox, instead of collapsing as most boxes would do, the force from the snow
pushes your mailbox up and away from the blade (shown at right).
By then the snowplow is gone, having cleared the snow away from the base of your mailbox, and you don't have to put up a new one the next
day! Couldn't be easier!
At first it might be hard to picture how this post/mount would work, but once you install one, you will
realize just how clever this concept is. The durability of these mailbox arms is amazing. The manufacturer has sold thousands in Northern New England over the past 30 years and
their customers really love them! They last and last and last.
# 124 MailSwing Assembly - Includes all mounting
hardware and adjustable mailbox mounting brackets. Mount on your 4 x 4 inch wood post or 2.5" galvanized steel post. See current pricing below.
We also carry the following.
Eight foot galvanized steel post, 2.5 inch diameter. Commonly available locally, but we now offer these as an option (see below).
Adjustable box brackets to fit virtually any postal approved mailbox, (included with #124).
Double box brackets to mount two standard mailboxes on the same assembly
Newspaper box brackets for mounting your newspaper box directly beside the mailbox.
We also carry the following.
Eight foot galvanized steel post, 2.5 inch diameter. Commonly available locally, but we now offer these as an option (see below).
Adjustable box brackets to fit virtually any postal approved mailbox, (included with #124).
Double box brackets to mount two standard mailboxes on the same assembly
Newspaper box brackets for mounting your newspaper box directly beside the mailbox.
You can now buy a MailSwing with or without a galvanized steel post and
cap. Newspaper Holder Bracket also available. Spreaders not to be used with heavy gauge mailboxes (Heavybilt, Veeders), and spreader mailboxes
must be between 6.25 and 8 inches wide. Make your selections below, specify mailbox to be mounted:
# 124 MailSwing Assembly - Includes all mounting
hardware and adjustable mailbox mounting brackets. Mount on your 4 x 4 inch wood post or 2.5" 
